FSCAN2500 Serials

 

 

Product use

• X-ray impurtity detector FSCAN series is specially engineered for impurity detection in the food and pharmaceutical industry.
• It can detect impurities that are not visible to naked eyes (metal,stone,glass and bones etc.).
• It can also detect internal defects such as void and cracks of the products.
• It can additionally detect products left in packing and defective products.

 

Applications:

DOWNLOAD: FSCAN2500 serials X-RAY impurity detector.doc

It is special for detect bottled products. including single probe and dual probe

 

Features and advantages:

• It can realize comprehensive detection,i.e.detection of impuiries such as stones,glass,plastic and bones,as well as internal defects of products,such as damage,defective packing,exposure etc. Such comprehensive function is unique in the industry.

• It differs from other similar products in that it can achieve a good detection effect but requiring no adjustment of the X-ray light source. This further demonstrates the advancement of the image processing technology.The practical significance is that it can be used to detect multiple products at the same time.

• The detection level is high in the world.The highest precision can reach:  Lead:0.2mm ,SUS:0.38mm ,Stone and Glass:1.2mm

• Impurity detector Fscan series can be used to  detect impurities in the metallic packing and aluminum film packing that cant be realized by metal detectors.

• X-RAY output can be with high power(FSCAN3200,195W)or low power (FSCAN3280,100W)

Main functions:

• Central management, convenient for connection to the management network for collective quality control;

• To detect insufficiency or defect of products;simultaneous detection of lacking quantity and product damage etc.;

• To measure the size of impuries; the size can be measured during detecion;

• USB ports available for copy detection data and images of a product, so as to realize full traceablity;

• Masking function. It can be used to mask any hard parts contained in the packing of the articles to be detected,such as glass,metalli fasteners,metallic cover etc., so as to avoid effect on the results of detection.

• Image thumb nail function. It is used to magnify images of a product for observation, providing convenience for detection and getting out impurities found.

• Automatic teaching and setup function. Providing convenience for operators to use the product.

• Various statements for production management, quality control, equipment service and operation can be generated.

• Compliant and incompliant images can be stored for redetection.

• Zooming funcion.

• Speed and turning direction of the conveyor belt can be freely adjusted.

 

Model		FSCAN2500
Sensitivity		lead ball：0.2mm   Fe/SUSS wire ：Φ0.28×1mm    Fe/SUS ball Φ0.38mmm
X-RAY power		Max：480W    adjustable
conveyor system	speed	Max：43m/min Min：10m/min
	Belt width	200mm
	Pass height	300mm
	Detect capability	20kg, when the speed is greater than 40 m/min recommended maximum weight not exceeding 10kg
	Belt height	750±50mm
Debug method		Auto set and manual set function
Photo management		Photo save /print/copy/analysis
Proof		IP66 in conveyor system
X-RAY leakage		max＜1uSv/hour
Product weight		480kg
H*L*W(mm)		1800* 2200* 775
Power consumption		1600W